2005-2008 RAV4 · Service Manual TRANSMISSION

TERMINALS OF ECM

System information · Vehicles built from Nov 2005


CHECK ECM
A107881E07
  1. Measure the voltage of the ECM connector.

    HINT:
    Each ECM terminal's standard voltage is shown in the table below.
    In the table, first follow the information under "Condition". Look under "Symbols (Terminal No.)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specified Condition".
    Use the illustration above as a reference for the ECM terminals.

    Symbols (Terminal No.)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    NSW(STAR) (B32-52) - E1 (B32-104)
    W - BR
    Park/Neutral position switch signal
    Ignition switch on (IG) and shift lever on P or N
    Below 2 V
    NSW(STAR) (B32-52) - E1 (B32-104)
    W - BR
    Park/Neutral position switch signal
    Ignition switch on (IG) and shift lever not on P or N
    10 to 14 V
    P (B32-73) - E1 (B32-104)
    L - BR
    P shift position switch signal
    Ignition switch on (IG) and shift lever on P
    10 to 14 V
    P (B32-73) - E1 (B32-104)
    L - BR
    P shift position switch signal
    Ignition switch on (IG) and shift lever not on P
    Below 1 V
    R (B32-53) - E1 (B32-104)
    R - BR
    R shift position switch signal
    Ignition switch on (IG) and shift lever on R
    10 to 14 V
    R (B32-53) - E1 (B32-104)
    R - BR
    R shift position switch signal
    Ignition switch on (IG) and shift lever not on R
    Below 1 V
    N (B32-54) - E1 (B32-104)
    Y - BR
    N shift position switch signal
    Ignition switch on (IG) and shift lever on N
    10 to 14 V
    N (B32-54) - E1 (B32-104)
    Y - BR
    N shift position switch signal
    Ignition switch on (IG) and shift lever not on N
    Below 1 V
    D (B32-56) - E1 (B32-104)
    B - BR
    D shift position switch signal
    Ignition switch on (IG) and shift lever on D or 3
    10 to 14 V
    D (B32-56) - E1 (B32-104)
    B - BR
    D shift position switch signal
    Ignition switch on (IG) and shift lever not on D or 3
    Below 1 V
    3 (A12-26) - E1 (B32-104)
    P - BR
    3 shift position switch signal
    Ignition switch on (IG) and shift lever on 3
    10 to 14 V
    3 (A12-26) - E1 (B32-104)
    P - BR
    3 shift position switch signal
    Ignition switch on (IG) and shift lever not on 3
    Below 1 V
    2 (B32-55) - E1 (B32-104)
    P - BR
    2 shift position switch signal
    Ignition switch on (IG) and shift lever on 2 and L
    10 to 14 V
    2 (B32-55) - E1 (B32-104)
    P - BR
    2 shift position switch signal
    Ignition switch on (IG) and shift lever not on 2 and L
    Below 1 V
    L (B32-74) - E1 (B32-104)
    LG - BR
    L shift position switch signal
    Ignition switch on (IG) and shift lever on L
    10 to 14 V
    L (B32-74) - E1 (B32-104)
    LG - BR
    L shift position switch signal
    Ignition switch on (IG) and shift lever not on L
    Below 1 V
    STP (A12-36) - E1 (B32-104)
    L - BR
    Stop light switch signal
    Brake pedal is depressed
    10 to 14 V
    STP (A12-36) - E1 (B32-104)
    L - BR
    Stop light switch signal
    Brake pedal is released
    Below 1 V
    SL1+ (B32-57) - SL1- (B32-77)
    V - P
    SL1 solenoid signal
    Engine idle speed
    Pulse generation
    (see waveform 1)
    SL2+ (B32-58) - SL2- (B32-59)
    Y - L
    SL2 solenoid signal
    Engine idle speed
    Pulse generation
    (see waveform 2)
    DSL (B32-79) - E01 (B32-45)
    G - W-B
    DSL solenoid signal
    Vehicle speed 65 km/h (40 mph), lock-up (ON to OFF)
    Below 1 V
    DSL (B32-79) - E01 (B32-45)
    G - W-B
    DSL solenoid signal
    Vehicle driving under lock-up position
    Pulse generation
    (see waveform 3)
    SLT+ (B32-76) - SLT- (B32-75)
    R - GR
    SLT solenoid signal
    Engine idle speed
    Pulse generation
    (see waveform 4)
    S4 (B32-78) - E01 (B32-45)
    W - W-B
    S4 solenoid signal
    Ignition switch on (IG)
    Below 1 V
    S4 (B32-78) - E01 (B32-45)
    W - W-B
    S4 solenoid signal
    O/D gear
    10 to 14 V
    S4 (B32-78) - E01 (B32-45)
    W - W-B
    S4 solenoid signal
    Not on O/D gear
    Below 1 V
    THO1 (B32-72) - ETHO (B32-95)
    LG - BR
    ATF temperature sensor signal
    ATF temperature: 115°C (239°F) or more
    Below 1.5 V
    NT+ (B32-125) - NT- (B32-124)
    W - R
    Speed sensor (NT) signal
    Vehicle speed 20 km/h (12 mph)
    Pulse generation
    (see waveform 5)
    NC+ (B32-101) - NC- (B32-102)
    R - W
    Speed sensor (NC) signal
    Vehicle speed 30 km/h (19 mph): (3rd gear)
    Engine speed 1,400 rpm
    Pulse generation
    (see waveform 6)

  2. G023426E03
    Using an oscilloscope, check the waveform 1.

    Waveform 1 (Reference):
    Item
    Content
    Symbols (Terminal No.)
    SL1+ (B32-57) - SL1- (B32-77)
    Tool Setting
    5 V/DIV., 1 msec./DIV.
    Condition
    Engine idle speed

  3. G023426E03
    Using an oscilloscope, check the waveform 2.

    Waveform 2 (Reference):
    Item
    Content
    Symbols (Terminal No.)
    SL2+ (B32-58) - SL2- (B32-59)
    Tool Setting
    5 V/DIV., 1 msec./DIV.
    Condition
    Engine idle speed

  4. C133935E01
    Using an oscilloscope, check the waveform 3.

    Waveform 3 (Reference):
    Item
    Content
    Symbols (Terminal No.)
    DSL (B32-79) - E01 (B32-45)
    Tool Setting
    10 V/DIV., 100 msec./DIV.
    Condition
    Vehicle speed 65 km/h (40 mph), lock-up (ON to OFF)

  5. G023426E03
    Using an oscilloscope, check the waveform 4.

    Waveform 4 (Reference):
    Item
    Content
    Symbols (Terminal No.)
    SLT+ (B32-76) - SLT- (B32-75)
    Tool Setting
    5 V/DIV., 1 msec./DIV.
    Condition
    Engine idle speed

  6. C053419E02
    Using an oscilloscope, check the waveform 5.

    Waveform 5 (Reference):
    Item
    Content
    Symbols (Terminal No.)
    NT+ (B32-125) - NT- (B32-124)
    Tool Setting
    5 V/DIV., 0.5 msec./DIV.
    Condition
    Vehicle speed 20 km/h (12 mph)

  7. C093866E03
    Using an oscilloscope, check the waveform 6.

    Waveform 6 (Reference):
    Item
    Content
    Symbols (Terminal No.)
    NC+ (B32-101) - NC- (B32-102)
    Tool Setting
    1 V/DIV., 1 msec./DIV.
    Condition
    Vehicle speed 30 km/h (19 mph): (3rd gear)
    Engine speed 1,400 rpm

← PROBLEM SYMPTOMS TABLE (from Aug 2007)DIAGNOSIS SYSTEM (Nov 2005 – Dec 2006) →