2005-2008 RAV4 · Service Manual BODY

INSPECTION

Inspection · Vehicles built from Nov 2005


INSPECT FRONT SEAT FRAME WITH ADJUSTER (for LHD)

  1. B081621E08
    Check operation of the seat frame (slide motor).

    1. Check if the seat frame moves smoothly when the battery is connected to the slide motor connector terminals.

      OK:
      Measurement Condition
      Operational Direction
      Battery positive (+) → 1 (FWD)
      Battery negative (-) → 2 (BACK)
      Forward
      Battery positive (+) → 2 (BACK)
      Battery negative (-) → 1 (FWD)
      Backward

      If the result is not as specified, replace the seat frame with adjuster.

  1. B081621E07
    Check operation of the seat frame (front vertical motor).

    1. Check if the seat frame moves smoothly when the battery is connected to the front vertical motor connector terminals.

      OK:
      Measurement Condition
      Operational Direction
      Battery positive (+) → 1 (UP)
      Battery negative (-) → 2 (DOWN)
      Upward
      Battery positive (+) → 2 (DOWN)
      Battery negative (-) → 1 (UP)
      Downward

      If the result is not as specified, replace the seat frame with adjuster.

  1. B081621E09
    Check operation of the seat frame (lifter motor).

    1. Check if the seat frame moves smoothly when the battery is connected to the lifter motor connector terminals.

      OK:
      Measurement Condition
      Operational Direction
      Battery positive (+) → 2 (UP)
      Battery negative (-) → 1 (DOWN)
      Upward
      Battery positive (+) → 1 (DOWN)
      Battery negative (-) → 2 (UP)
      Downward

      If the result is not as specified, replace the seat frame with adjuster.

  1. B081621E10
    Check operation of the seat frame (reclining motor).

    1. Check if the seat frame moves smoothly when the battery is connected to the reclining motor connector terminals.

      OK:
      Measurement Condition
      Operational Direction
      Battery positive (+) → 2 (FWD)
      Battery negative (-) → 1 (BACK)
      Forward
      Battery positive (+) → 1 (BACK)
      Battery negative (-) → 2 (FWD)
      Backward

      If the result is not as specified, replace the seat frame with adjuster.


INSPECT FRONT SEAT FRAME WITH ADJUSTER (for RHD)

  1. B081621E11
    Check operation of the seat frame (slide motor).

    1. Check if the seat frame moves smoothly when the battery is connected to the slide motor connector terminals.

      OK:
      Measurement Condition
      Operational Direction
      Battery positive (+) → 2 (FWD)
      Battery negative (-) → 1 (BACK)
      Forward
      Battery positive (+) → 1 (BACK)
      Battery negative (-) → 2 (FWD)
      Backward

      If the result is not as specified, replace the seat frame with adjuster.

  1. B081621E12
    Check operation of the seat frame (front vertical motor).

    1. Check if the seat frame moves smoothly when the battery is connected to the front vertical motor connector terminals.

      OK:
      Measurement Condition
      Operational Direction
      Battery positive (+) → 2 (UP)
      Battery negative (-) → 1 (DOWN)
      Upward
      Battery positive (+) → 1 (DOWN)
      Battery negative (-) → 2 (UP)
      Downward

      If the result is not as specified, replace the seat frame with adjuster.

  1. B081621E13
    Check operation of the seat frame (lifter motor).

    1. Check if the seat frame moves smoothly when the battery is connected to the lifter motor connector terminals.

      OK:
      Measurement Condition
      Operational Direction
      Battery positive (+) → 1 (UP)
      Battery negative (-) → 2 (DOWN)
      Upward
      Battery positive (+) → 2 (DOWN)
      Battery negative (-) → 1 (UP)
      Downward

      If the result is not as specified, replace the seat frame with adjuster.

  1. B081621E10
    Check operation of the seat frame (reclining motor).

    1. Check if the seat frame moves smoothly when the battery is connected to the reclining motor connector terminals.

      OK:
      Measurement Condition
      Operational Direction
      Battery positive (+) → 2 (FWD)
      Battery negative (-) → 1 (BACK)
      Forward
      Battery positive (+) → 1 (BACK)
      Battery negative (-) → 2 (FWD)
      Backward

      If the result is not as specified, replace the seat frame with adjuster.

← INSPECTION (from Nov 2005)INSPECTION (from Nov 2005) →