ON-VEHICLE INSPECTION
Inspection · Vehicles built from Nov 2005
| DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
| REMOVE STARTER RELAY |
for LHD:
Remove the starter relay from the No. 7 relay block.
for RHD:
Remove the starter relay from the No. 8 relay block.
| INSPECT STARTER RELAY |
Inspect the resistance of the starter relay.

- Standard resistance:
Terminal Connection
Specified Condition
3 - 5
10 kΩ or higher
3 - 5
Below 1 Ω
(when battery voltage is applied to terminals 1 and 2)
| INSTALL STARTER RELAY |
| CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
