2005-2008 RAV4 · Service Manual RESTRAINTS

HOW TO PROCEED WITH TROUBLESHOOTING

Troubleshooting · Vehicles built Nov 2005 – Jul 2008

Versions by build date: Nov 2005 – Jul 2008 from Aug 2008

HINT:
  1. Use these procedures to troubleshoot the supplemental restraint system.
  2. *: Use the intelligent tester.


1.VEHICLE BROUGHT TO WORKSHOP
    NEXT

    2.INSPECT BATTERY VOLTAGE

      Standard voltage:
      11 to 14 V

      If the voltage is below 11 V, recharge or replace the battery before proceeding.
    NEXT

    3.CHECK MULTIPLEX COMMUNICATION SYSTEM*
    1. Check the DTC.

      Result 
      Result
      Proceed to
      DTC is not output
      A
      DTC is output
      B


    B.
    A

    4.CHECK CAN COMMUNICATION SYSTEM*
    1. Check the DTC.

      Result 
      Result
      Proceed to
      DTC is not output
      A
      DTC is output
      B


    B.
    A

    5.WARNING LIGHT CHECK
      NEXT

      6.CHECK DTC (Present and Past DTCs)*
      1. Check the DTC.

        Result 
        Result
        Proceed to
        DTC is not output
        A
        DTC is output
        B


      B.
      A

      7.DTC CHART
        NEXT

        8.CIRCUIT INSPECTION
          NEXT

          9.REPAIR
            NEXT

            10.CLEAR DTC (Present and Past DTCs)*
              NEXT

              11.CHECK FOR DTC (Present and Past DTCs)*
              1. Check the DTC.

                Result 
                Result
                Proceed to
                DTC is not output
                A
                DTC is output
                B


              B.
              12.CONFIRMATION TEST
                NEXT

                ← SYSTEM DESCRIPTION (from Nov 2005)HOW TO PROCEED WITH TROUBLESHOOTING (from Aug 2008) →