REMOVAL
Removal / installation · Vehicles built from Nov 2005
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
| 2. REMOVE STEERING COLUMN COVER LOWER |
Detach the 4 claws, release the tilt lever and remove the steering column cover lower.

| 3. REMOVE IGNITION SWITCH ASSEMBLY |
Disconnect the ignition switch connector.

Disconnect the ignition key cylinder light connector.
Remove the 2 screws and ignition switch.

