2005-2008 RAV4 · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built from Nov 2005


1. INSTALL STARTER ASSEMBLY

  1. A124921
    Install the starter with the 2 bolts.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }

  1. A124920
    Connect the starter connector.

  1. Install the terminal nut and cover the nut with the cap.

    Torque:
    9.8 N*m{ 100 kgf*cm , 7 ft.*lbf }


2. INSTALL BATTERY BRACKET REINFORCEMENT

  1. A124919
    Install the bracket reinforcement.

    Torque:
    19 N*m{ 194 kgf*cm , 14 ft.*lbf }


3. INSTALL FRONT BATTERY BRACKET

A124918
  1. Install the bracket front with the 4 bolts.

    Torque:
    19 N*m{ 194 kgf*cm , 14 ft.*lbf }

  1. Attach the 2 wire harness clamps.


4. INSTALL BATTERY

5. INSTALL BATTERY INSULATOR

6. INSTALL BATTERY CLAMP

  1. A124917E01
    Attach the hook of the battery clamp to the battery bracket front.

  1. Temporarily tighten the nut and install the bolt.

  1. Adjust the battery clamp's position.

  1. Fully tighten the nut and bolt.

    Torque:
    5.0 N*m{ 51 kgf*cm , 44 in.*lbf }

  1. Attach the 2 wire harness clamps.


7. CONNECT CABLE TO POSITIVE BATTERY TERMINAL

8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
← REASSEMBLY (from Nov 2005)COMPONENTS (from Nov 2005) →