2005-2008 RAV4 · Service Manual ENGINE

DISASSEMBLY

Removal / installation · Vehicles built from Nov 2005


1. REMOVE MAGNETIC SWITCH ASSEMBLY

  1. A079718
    Remove the nut and disconnect the lead wire from the magnetic switch.

  1. A079719
    Remove the 2 screws holding the magnetic switch to the starter drive housing.

  1. Remove the magnetic switch.

  1. Remove the return spring and plunger from the starter drive housing.


2. REMOVE STARTER YOKE ASSEMBLY

  1. A079720
    Remove the 2 through-bolts, and pull out the starter yoke together with the commutator end frame.

  1. A079721
    Remove the starter yoke from the commutator end frame.


3. REMOVE STARTER ARMATURE PLATE

  1. A079722
    Remove the armature plate from the starter yoke.


4. REMOVE STARTER COMMUTATOR END FRAME COVER

  1. A079723
    Using a screwdriver, pry out the commutator end frame cover.


5. REMOVE STARTER ARMATURE ASSEMBLY

  1. A082440E03
    Using snap ring pliers, remove the snap ring and plate washer.

  1. Remove the armature from the commutator end frame.


6. REMOVE PLANETARY GEAR

  1. A081167
    Remove the 3 planetary gears from the starter drive housing.

← REMOVAL (from Nov 2005)INSPECTION (from Nov 2005) →