P1602 Deterioration of Battery
Diagnostic trouble codes · Vehicles built from Jan 2007
Versions by build date: Nov 2005 – Dec 2006 from Jan 2007
DESCRIPTION
The ECM determines the battery power according to the voltage of the BATT terminal while the engine is running (not cranking).
DTC No.
|
DTC Detection Condition
|
Trouble Area
|
P1602
|
Battery power is 0%
|
- Battery
- ECM back-up power source circuit
|
INSPECTION PROCEDURE
| 1. INSPECT BATTERY |
 |
- Inspect battery specific gravity
- Check the specific gravity of each cell.
- Standard gravity:
- 1.25 to 1.29 at 20°C (68°F)
- Inspect battery voltage
- After the vehicle is driven for 20 minutes, stop the engine.
- Turn the ignition switch on (IG), and turn on the headlights, blower fan and defogger for 1 minute.
- Turn the ignition switch off.
- Measure the battery voltage.
- Standard voltage:
- 12.5 to 12.9 V at 20°C (68°F)
|
NG |
 |
|
|
|
| OK |
|
 |
|
| CHECK ECU POWER SOURCE CIRCUIT |
|