2005-2008 RAV4 · Service Manual TRANSMISSION

DISASSEMBLY

Removal / installation · Vehicles built from Nov 2005


1. REMOVE CLUTCH START SWITCH ASSEMBLY (w/ Entry and Start System)
  1. Disconnect the clutch start switch connector.

  1. Remove the nut and clutch start switch from the clutch pedal support.


2. REMOVE CLUTCH START CANCEL SWITCH ASSEMBLY (w/ Cruise Control System)
  1. Remove the switch assembly.
    For 1AZ-FE, 2AZ-FE, refer to the following procedures (Click here).
    For 2AD-FTV, 2AD-FHV, refer to the following procedures (Click here).


3. REMOVE CLUTCH PEDAL SPRING

C128471
  1. Remove the clutch pedal spring.


4. REMOVE CLUTCH PEDAL SUB-ASSEMBLY

  1. C128472
    Remove the clutch pedal return spring.

  1. C128473
    Remove the bolt, nut and clutch pedal from the clutch pedal support.


5. REMOVE CLUTCH PEDAL SPRING HOLDER

C128474
  1. Remove the clutch pedal spring holder.


6. REMOVE COLLAR

C128475
  1. Remove the 2 bushes and collar.


7. REMOVE CLUTCH PEDAL CUSHION

C128849
  1. Remove the cushion from the clutch pedal.


8. REMOVE PEDAL SPRING HOOK

C128476
  1. Remove the hook from the clutch pedal support.

← REMOVAL (from Jan 2007)ADJUSTMENT (from Nov 2005) →