INSTALLATION
Removal / installation · Vehicles built from Nov 2005
| 1. INSTALL SIDE TURN SIGNAL LIGHT ASSEMBLY (for Fender Type) |
![]() ![]() |
Connect the connector and install the side turn signal light.
Attach the side turn signal light with the 2 claws and install the light as shown in the illustration.
| 2. INSTALL SIDE TURN SIGNAL LIGHT ASSEMBLY (for Mirror Type) |
Connect the connector.

Install the 2 screws to install the light.
| 3. INSTALL OUTER MIRROR COVER LH (for Mirror Type) |
Attach the 8 claws to install the mirror cover.

Check that there is no gap between the cover and mirror body.
- HINT:
- If there is a gap between the cover and body, noise will occur during driving.
| 4. INSTALL OUTER REAR VIEW MIRROR SUB-ASSEMBLY LH (for Mirror Type) |
w/ Mirror Heater:

Connect the 2 connectors.
Attach the 4 claws to install the mirror.


