REMOVAL
Removal / installation · Vehicles built from Nov 2005
| 1. REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY LH (for Fender Type) |
![]() ![]() |
Detach the 2 claws and remove the light as shown in the illustration.
Disconnect the connector and remove the side turn signal light.
| 2. REMOVE OUTER REAR VIEW MIRROR SUB-ASSEMBLY LH (for Mirror Type) |
Using a moulding remover, detach the 4 claws and remove the mirror.

- HINT:
- Apply protective tape to the mirror body.
w/ Mirror Heater:

Disconnect the 2 connectors.
| 3. REMOVE OUTER MIRROR COVER LH (for Mirror Type) |
Using a screwdriver, detach the 8 claws and remove the mirror cover.

- HINT:
- Apply protective tape to the mirror body.
- Tape the screwdriver tip before use.
- Apply protective tape to the mirror body.
| 4. REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY LH (for Mirror Type) |
Remove the 2 screws and side turn signal light.

Disconnect the connector.

