REMOVAL
Removal / installation · Vehicles built from Nov 2005
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
| 2. REMOVE BACK DOOR CENTER GARNISH |
Using a screwdriver, detach the 4 claws and 4 clips and remove the garnish.

- HINT:
- Tape the screwdriver tip before use.
| 3. REMOVE CENTER STOP LIGHT ASSEMBLY |
![]() ![]() |
Disconnect the connector.
Remove the 2 screws and center stop light.

