REMOVAL
Removal / installation · Vehicles built from Nov 2005
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
| 2. REMOVE ROOM LIGHT LENS |
![]() ![]() |
Using a screwdriver, detach the 4 claws and remove the lens.
- HINT:
- Tape the screwdriver tip before use.
| 3. REMOVE ROOM LIGHT ASSEMBLY |
Using a screwdriver, detach the 4 claws and remove the 2 covers.

- HINT:
- Tape the screwdriver tip before use.
Remove the bulb from the room light switch base.

Using a screwdriver, detach the 4 claws and remove the light.

- HINT:
- Tape the screwdriver tip before use.
Using a screwdriver, detach the 4 claws and remove the room light switch base.

- HINT:
- Tape the screwdriver tip before use.

