INSTALLATION
Removal / installation · Vehicles built from Nov 2005
| 1.
INSTALL HOOD LOCK CONTROL CABLE ASSEMBLY |
 |
Install the cable to the clamps, wire harness protector and wire harness grommet as shown in the illustration.


| 2.
INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY |
 |
- Connect the cable to the lever.
Attach the 3 claws to install the lever.
| 3.
INSTALL HOOD LOCK ASSEMBLY |
 |
- Connect the cable to the lock.
Install the lock with the 3 bolts.
-
Torque:
- 8.0 N*m{
82 kgf*cm
, 71 in.*lbf
}
Adjust the lock.
w/ Hood courtesy switch:
Connect the connector.
| 4.
INSTALL RADIATOR SUPPORT OPENING COVER
|
 |
- Install the 2 clips.
| 5.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
|