INSTALLATION
Removal / installation · Vehicles built from Nov 2005
| 1.
INSTALL CLUTCH ACCUMULATOR ASSEMBLY |
 |
Install the clutch accumulator with the bolt and 2 nuts.
-
Torque:
- 12 N*m{
122 kgf*cm
, 9 ft.*lbf
}
- Using SST, connect the 2 flexible tubes.
- SST
- 09023-00101
-
Torque:
- 15 N*m{
153 kgf*cm
, 11 ft.*lbf
}
for use without SST
- 14 N*m{
143 kgf*cm
, 10 ft.*lbf
}
for use with SST
- HINT:
- Use a torque wrench with a fulcrum length of 30 cm (11.81 in.).
| 2.
BLEED AIR FROM CLUTCH PIPE LINE |
 |
Fill the master cylinder reservoir with fluid.
Bleed air from the clutch system.
| 3.
CHECK FOR CLUTCH FLUID LEAKAGE |
|
| 4.
CHECK FLUID LEVEL IN RESERVOIR
|
 |
Check the fluid level and add fluid if necessary.
- Fluid:
- SAE J1703 or FMVSS No. 116 DOT3
- HINT:
- Add fluid to a level between the reservoir's MIN and MAX lines.