2005-2008 RAV4 · Service Manual
BODY ELECTRICAL
Home
›
BODY ELECTRICAL
› LIGHTING › BACK-UP LIGHT SWITCH
INSPECTION
Inspection
·
Vehicles built from Nov 2005
INSPECT BACK-UP LIGHT SWITCH ASSEMBLY
Measure the resistance of the switch.
Standard resistance:
Tester Connection
Switch Condition
Specified Condition
1 - 2
Pushed
Below 1 Ω
1 - 2
Not pushed
10 kΩ or higher
If the result is not as specified, replace the switch assembly.
← REMOVAL (from Aug 2007)
INSTALLATION (Nov 2005 – Dec 2006) →