REMOVAL
Removal / installation · Vehicles built Nov 2005 – Dec 2006
Versions by build date: Nov 2005 – Dec 2006 from Jan 2007
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
| 2. REMOVE SWITCH BASE |
![]() ![]() |
Detach the 2 clips and 2 claws.
Disconnect the connectors and remove the switch base.
| 3. REMOVE CIGARETTE LIGHTER COVER |
Detach the 2 claws and remove the bezel stay.


| 4. REMOVE CIGARETTE LIGHTER ASSEMBLY |
Rotate the socket to disengage the notch.



Pull out the socket halfway and rotate the socket until its protrusion is aligned with the groove of the bezel stay.
Remove the socket from the bezel stay.

