REMOVAL
Removal / installation · Vehicles built Nov 2005 – Dec 2006
Versions by build date: Nov 2005 – Dec 2006 from Jan 2007
| 1.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
 |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
| 2.
REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL CENTER
|
 |
Using a screwdriver, detach the 3 clips, 3 claws and remove the cluster finish panel, then disconnect the connector.
- HINT:
- Tape the screwdriver tip before use.
| 3.
REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL CENTER
|
 |
Using a screwdriver, detach the 3 clips, 3 claws and remove the cluster finish panel, then disconnect the connector.
- HINT:
- Tape the screwdriver tip before use.
| 4.
REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (w/ Cassette Tape Player) |
 |
Detach the 4 claws and remove the instrument cluster finish panel.
| 5.
REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET |
 |
Remove the 4 bolts.
Detach the 4 claws.
Disconnect the all connectors and remove the radio receiver with bracket.


- Remove the 4 bolts and No. 1 radio bracket from the radio receiver.
- Remove the 4 bolts and No. 2 radio bracket from the radio receiver.
| 6.
REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET (w/ Cassette Tape Player) |
 |
Remove the 4 bolts.
Disconnect all connectors and remove the radio receiver with bracket.


- w/o Stereo Opening Cover:
Remove the 4 bolts and No. 1 radio bracket from the radio receiver.
- w/o Stereo Opening Cover:
Remove the 4 bolts and No. 2 radio bracket from the radio receiver.
- w/ Stereo Opening Cover:
Remove the 4 bolts, radio receiver panel RH and No. 1 radio bracket from the radio receiver.
- w/ Stereo Opening Cover:
Remove the 4 bolts, radio receiver panel LH and No. 2 radio bracket from the radio receiver.