ON-VEHICLE INSPECTION
Inspection · Vehicles built from Nov 2005
| OPERATION CHECK |
Disconnect the vacuum hose from the vacuum pump.
Connect the hose of the vacuum gauge to the vacuum pump.

Start the engine and warm it up for more than 2 minutes.
With the engine idling, check the negative pressure of the vacuum pump.
- Standard pressure:
- More than 86.7 kPa (650 mmHg, 26 in.Hg)
- HINT:
- It is necessary to replace the vacuum pump every 200,000 km (124,000 miles).
Remove the vacuum gauge from the vacuum pump.
Connect the vacuum hose to the vacuum pump.
