2005-2008 RAV4 · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built from Nov 2005


1. INSTALL EGR VALVE ASSEMBLY

  1. A126857
    Install a new gasket and the EGR valve with the 2 bolts.

    Torque:
    24 N*m{ 245 kgf*cm , 18 ft.*lbf }

  1. Connect the EGR valve connector.


2. INSTALL NO. 2 EGR PIPE SUB-ASSEMBLY

  1. A126858
    Temporarily install 2 new gaskets and the EGR pipe with the nut and bolt.

  1. A126859
    Temporarily install the bolt and nut.

  1. A114873
    Tighten the 2 bolts holding the EGR pipe to the cylinder head.

    Torque:
    24 N*m{ 245 kgf*cm , 18 ft.*lbf }

  1. A110765
    Tighten the 2 nuts holding the EGR pipe to the EGR valve.

    Torque:
    24 N*m{ 245 kgf*cm , 18 ft.*lbf }


3. INSTALL NO. 1 ENGINE COVER

  1. A123518
    Attach the 4 clips to install the engine cover.


4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
← INSPECTION (from Nov 2005)COMPONENTS (from Nov 2005) →