REMOVAL
Removal / installation · Vehicles built from Nov 2005
| 1.
REMOVE NO. 1 ENGINE COVER
|
 |
- Detach the 4 clips and remove the engine cover.
| 2.
REMOVE AIR CLEANER CAP SUB-ASSEMBLY
|
 |
- Disconnect the mass air flow meter connector.
Disconnect the wire harness clamp.
Unhook the 3 hook clamps, and then remove the air cleaner cap.
Remove the air cleaner filter element from the air cleaner case.
| 3.
REMOVE AIR CLEANER ASSEMBLY WITH ELEMENT
|
 |
- Disconnect the wire harness clamp and remove the 3 bolts and air cleaner case.
| 4.
REMOVE FUEL FILTER ASSEMBLY |
 |
Disconnect the level warning switch connector.


Disconnect the 4 hoses indicated in the illustration.
Remove the bolt and fuel filter.
| 5.
DRAIN FUEL |
 |
- Loosen the drain bolt, and drain the fuel from the fuel filter.
| 6.
REMOVE LEVEL WARNING SWITCH |
 |
- Clamp the fuel filter in a vise.
- NOTICE:
- Be careful not to damage the fuel filter cap.
Using pliers, remove the fuel level warning switch.
- NOTICE:
- Be careful not to damage the level warning switch.
Remove the O-ring from the fuel level warning switch.
| 7.
REMOVE FUEL FILTER ELEMENT SUB-ASSEMBLY |
 |
- Using SST, remove the fuel filter element.
- SST
- 09228-64030