2005-2008 RAV4 · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built from Nov 2005


1. INSTALL EGR VALVE ASSEMBLY

  1. A126857
    Install a new gasket and the EGR valve with the 2 bolts.

    Torque:
    24 N*m{ 245 kgf*cm , 18 ft.*lbf }

  1. A110766
    Connect the EGR valve connector.


2. INSTALL NO. 2 EGR PIPE SUB-ASSEMBLY

  1. A126858
    Temporarily install 2 new gaskets and EGR pipe with the nut and bolt as shown in the illustration.

  1. A126859
    Temporarily install the bolt and nut as shown in the illustration.

  1. A126977
    Tighten the 2 bolts holding the EGR pipe to the cylinder head.

    Torque:
    24 N*m{ 245 kgf*cm , 18 ft.*lbf }

  1. A110765
    Tighten the 2 nuts holding the EGR pipe to the EGR valve.

    Torque:
    24 N*m{ 245 kgf*cm , 18 ft.*lbf }


3. INSTALL NO. 1 ENGINE COVER

  1. A123518
    Attach the 4 clips to install the engine cover.


4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
← INSPECTION (from Nov 2005)COMPONENTS (from Nov 2005) →