REMOVAL
Removal / installation · Vehicles built from Nov 2005
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
| 2. REMOVE NO. 1 ENGINE COVER |
Detach the 4 clips and remove the engine cover.

| 3. REMOVE NO. 2 EGR PIPE SUB-ASSEMBLY |
Remove the 2 bolts.

Remove the 2 nuts, No. 2 EGR pipe and 2 gaskets.

| 4. REMOVE EGR VALVE ASSEMBLY |
Disconnect the EGR valve connector.

Remove the 2 bolts, EGR valve and gasket.

