2005-2008 RAV4 · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built from Jan 2007

Versions by build date: Nov 2005 – Dec 2006 from Jan 2007


1. INSTALL STARTER ASSEMBLY

  1. A163979
    Install the starter with the 2 bolts.

    Torque:
    64 N*m{ 652 kgf*cm , 47 ft.*lbf }

  1. A163980
    Install the starter wire and nut with the terminal cap.

    Torque:
    9.8 N*m{ 100 kgf*cm , 87 in.*lbf }

  1. Connect the starter connector.


2. INSTALL NO. 3 AIR HOSE

  1. A124889
    Install the No. 3 air hose to the No. 2 air tube and throttle body.

  1. Tighten the 2 hose clamps.

    Torque:
    6.3 N*m{ 64 kgf*cm , 56 in.*lbf }


3. INSTALL NO. 1 AIR TUBE

  1. A124905
    Install the No.1 air tube with the 2 bolts.

    Torque:
    29 N*m{ 296 kgf*cm , 21 ft.*lbf }

  1. Tighten the 2 clamps.

    Torque:
    6.3 N*m{ 64 kgf*cm , 56 in.*lbf }

  1. A124904
    Install the wire harness with the 2 bolts.

    Torque:
    7.5 N*m{ 76 kgf*cm , 66 in.*lbf }


4. INSTALL AIR CLEANER BRACKET

  1. A124934
    Install the bracket with the 3 bolts.

    Torque:
    7.5 N*m{ 76 kgf*cm , 66 in.*lbf }

  1. Connect the 2 fuel hoses to the bracket.

  1. Connect the 2 wire harness clamps.

  1. A124933
    Install the glow plug relay and connect the fuel filter level switch connector.


5. INSTALL FUEL FILTER ASSEMBLY

  1. A134129
    Install the fuel filter assembly with the bolt.

    Torque:
    7.0 N*m{ 71 kgf*cm , 62 in.*lbf }


6. INSTALL AIR CLEANER CASE

  1. A129328
    Install the air cleaner case with the 3 bolts and connect the wire harness clamp.

    Torque:
    5.0 N*m{ 51 kgf*cm , 44 in.*lbf }

  1. Install the air cleaner element.


7. INSTALL AIR CLEANER CAP

  1. A124929E02
    Insert the hinge parts of the air cleaner cap into the air cleaner case, and then hang the 3 hook clamps.

  1. Connect the mass air flow meter connector.

  1. Connect the wire harness clamp.


8. INSTALL BATTERY BRACKET REINFORCEMENT

  1. A124919
    Install the bracket reinforcement with the 2 bolts.

    Torque:
    19 N*m{ 194 kgf*cm , 14 ft.*lbf }


9. INSTALL FRONT BATTERY BRACKET

  1. A124918
    Install the front bracket with the 4 bolts.

    Torque:
    19 N*m{ 194 kgf*cm , 14 ft.*lbf }

  1. Attach the 2 wire harness clamps.


10. INSTALL BATTERY

11. INSTALL BATTERY INSULATOR

12. INSTALL BATTERY CLAMP

  1. A124917E01
    Attach the hook of the battery clamp to the front battery bracket.

  1. Temporarily tighten the nut and install the bolt.

  1. Adjust the battery clamp's position.

  1. Fully tighten the nut and bolt.

    Torque:
    5.0 N*m{ 51 kgf*cm , 44 in.*lbf }

  1. Attach the 2 wire harness clamps.


13. CONNECT CABLE TO POSITIVE BATTERY TERMINAL

14. INSTALL NO. 1 ENGINE UNDER COVER
  1. Install the engine under cover with the 12 clips and 4 bolts.


15. INSTALL RADIATOR SUPPORT OPENING COVER
  1. Install the cover with the 9 clips.


16. INSTALL NO. 1 ENGINE COVER

  1. A123518
    Attach the 4 clips to install the engine cover.


17. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
← INSTALLATION (Nov 2005 – Dec 2006)ON-VEHICLE INSPECTION (from Nov 2005) →