INSTALLATION
Removal / installation · Vehicles built from Nov 2005
| 1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY |
Apply a light coat of engine oil to the O-ring of the oil control valve.

Install the oil control valve with the bolt.

- Torque:
- 9.0 N*m{ 92 kgf*cm , 80 in.*lbf }
- NOTICE:
- Make sure that the O-ring is not cracked or jammed.
Connect the oil control valve connector.
| 2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 3. CHECK FOR ENGINE OIL LEAKS |
Start the engine, and check that there are no oil leaks.
| 4. INSTALL NO. 1 ENGINE COVER |
Remove the 2 nuts and engine cover.

