ON-VEHICLE INSPECTION
Inspection · Vehicles built from Nov 2005
| CHECK CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY |
Check the operation.

Connect the intelligent tester to the DLC3.
Turn the ignition switch on (IG).
Turn the intelligent tester main switch ON.
Start and warm up the engine.
Select the menu items: Powertrain / Engine and ECT/ Active Test / Control the VVT System (Bank 1).
Operate the OCV using the intelligent tester, and then check the engine speed.
- Standard condition:
Tester Operation
Specified Condition
OCV is OFF
Normal engine speed
OCV is ON
Rough idling or engine stalls
