REMOVAL
Removal / installation · Vehicles built from Nov 2005
| 1.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
 |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
| 2.
REMOVE NO. 1 ENGINE COVER
|
 |
- Detach the 4 clips and remove the engine cover.
| 3.
REMOVE AIR CLEANER ASSEMBLY
|
 |
- Disconnect the mass air flow meter connector.
Unhook the 3 hook clamps.
Disengage the wire harness clamp.
- Using pliers, grip the claws of the clip and slide the clip to disconnect the PCV hose from the cylinder head cover.
Using pliers, grip the claws of the clip to remove the air cleaner cap.
Remove the air filter element.
- Disconnect the wire harness clamp and remove the 3 bolts and air cleaner case.
| 4.
REMOVE FUEL TUBE SUB-ASSEMBLY |
 |
- Disconnect the exhaust fuel addition injector connector.
- Turn the retainer as shown in the illustration.
- Disconnect the fuel tube.
- Remove the union bolt, fuel tube and gasket.
| 5.
REMOVE EXHAUST FUEL ADDITION INJECTOR ASSEMBLY |
 |
- Remove the bolt, washer, nozzle holder clamp, exhaust fuel addition injector and gasket.