2005-2008 RAV4 · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Jan 2007


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.


2. REMOVE NO. 1 ENGINE COVER

  1. A123518
    Detach the 4 clips and remove the engine cover.


3. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

  1. A124927E01
    Disconnect the mass air flow meter connector.

  1. Disconnect the wire harness clamp.

  1. Unhook the 3 hook clamps, and then remove the air cleaner cap.

  1. Remove the air cleaner filter element from the air cleaner case.


4. REMOVE AIR CLEANER CASE

  1. A124928E01
    Disconnect the wire harness clamp and remove the 3 bolts and air cleaner case.


5. REMOVE FUEL HOSE PROTECTOR

  1. A160454
    Remove the bolt and the fuel hose protector.


6. REMOVE FUEL TUBE SUB-ASSEMBLY

  1. A114936
    Disconnect the exhaust fuel addition injector connector.

  1. A110783
    Turn the retainer as shown in the illustration.

  1. A110784
    Disconnect the fuel tube.

  1. A114952
    Remove the union bolt, fuel tube and gasket.


7. REMOVE EXHAUST FUEL ADDITION INJECTOR ASSEMBLY

  1. A114959
    Remove the bolt, washer, nozzle holder clamp, exhaust fuel addition injector and gasket.

← COMPONENTS (from Jan 2007)INSPECTION (from Jan 2007) →