2005-2008 RAV4 · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built Jan 2007 – Jul 2007

Versions by build date: Nov 2005 – Dec 2006 Jan 2007 – Jul 2007 from Aug 2007


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.


2. REMOVE ENGINE ASSEMBLY
  1. Remove the engine (Click here).


3. REMOVE NO. 1 MANIFOLD CONVERTER INSULATOR

  1. A110807
    Remove the 4 bolts and manifold converter insulator.


4. REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY

  1. A110767
    Remove the bolt, nut and No. 1 manifold stay.

  1. A114905
    Remove the 3 bolts and No. 2 manifold stay.

  1. A124938
    Remove the 2 bolts, nut and No. 2 exhaust manifold stay.

  1. A110789
    Remove the 3 nuts, manifold converter and gasket.


5. REMOVE NO. 2 WATER BY-PASS HOSE

  1. A114896
    Using pliers, grip the claws of the 2 clips and slide the 2 clips to remove the No. 2 water by-pass hose.

    HINT:
    Place a container under the connection before removing the water by-pass hose because coolant in the hose may spill out.


6. REMOVE EGR COOLER ASSEMBLY

  1. A124936
    Remove the 4 bolts.

  1. Remove the 2 bolts, 2 nuts, EGR cooler, O-ring and 2 gaskets.

← REMOVAL (Nov 2005 – Dec 2006)REMOVAL (from Aug 2007) →