P0045 Turbocharger / Supercharger Boost Control Solenoid Circuit / Open
Diagnostic trouble codes · Vehicles built from Nov 2005
DESCRIPTION
| DTC No. |
DTC Detection Condition |
Trouble Area |
| P0045 |
Open or short in VRV circuit for 0.5 seconds or more (1 trip detection logic) |
|
WIRING DIAGRAM


INSPECTION PROCEDURE
| 1. INSPECT VRV FOR TURBOCHARGER CONTROL |
Disconnect the B44 VRV connector.

Measure the resistance of the VRV.
- Standard resistance:
Tester Connection
Condition
Specified Condition
B44-1 - B44-2
20°C (68°F)
11.1 to 12.5 Ω
Reconnect the VRV connector.
|
|
||||
| OK | |
| 2. INSPECT VRV FOR TURBOCHARGER CONTROL (TERMINAL 1 VOLTAGE) |
Disconnect the B44 VRV connector.

Turn the ignition switch on (IG).
Measure the voltage of the VRV connector.
- Standard voltage:
Tester Connection
Specified Condition
B44-1 - Body ground
9 to 14 V
Reconnect the VRV connector.
|
|
||||
| OK | |
| 3. CHECK WIRE HARNESS (VRV - ECM) |
Disconnect the B44 VRV connector.

Disconnect the B32 ECM connector.
Measure the resistance of the wire harness connector.
- Standard resistance:
Tester Connection
Specified Condition
B44-2 - B32-84 (VN)
Below 1 Ω
B44-2 or B32-84 (VN) - Body ground
10 kΩ or higher
Reconnect the VRV connector.
Reconnect the ECM connector.
|
|
||||
| OK | ||
| ||
