DATA LIST / ACTIVE TEST
System information · Vehicles built from Nov 2005
| READ DATA LIST |
- HINT:
- Using the intelligent tester's Data List allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the Data List early in troubleshooting is one way to save time.
Connect the intelligent tester to the DLC3.
Turn the ignition switch on (IG).
Read the Data List according to the display on the tester.
- ECM:
Item
Measurement Item / Display (Range)
Normal Condition
Diagnostic Note
Vehicle Spd
Vehicle speed / min.: 0 km/h (0 mph) max.: 200 km/h (125 mph)
Actual vehicle speed
-
Memory Spd
Vehicle speed / min.: 0 km/h (0 mph) max.: 200 km/h (125 mph)
Actual vehicle speed stored in memory
-
Cruise control
Cruise control / ON or OFF
ON: Cruise control is SET
OFF: Cruise control is UNSET
-
Main SW (Main)
Main switch (Main CPU) / ON or OFF
ON: Main switch (Main CPU) is SET
OFF: Main switch (Main CPU) is UNSET
-
CCS Relay M
Switch ready (Main CPU) / ON or OFF
ON: Switch ready (Main CPU) is SET
OFF: Switch ready (Main CPU) is UNSET
-
CCS Indicator M
Switch indicator (Main CPU) / ON or OFF
ON: Switch indicator (Main CPU) is SET
OFF: Switch indicator (Main CPU) is UNSET
-
Cancel SW
CANCEL switch / ON or OFF
ON: CANCEL switch is SET
OFF: CANCEL switch is UNSET
-
SET/COAST SW
- / SET switch / ON or OFF
ON: - / SET switch is SET
OFF: - / SET switch is UNSET
-
RES/ACC SW
+ / RES switch / ON or OFF
ON: + / RES switch is SET
OFF: + / RES switch is UNSET
-
Stp Light SW M
Stop light SW signal (Main CPU) / ON or OFF
ON: Brake pedal depressed
OFF: Brake pedal released
-
Shift D Pos
Shift D position / ON or OFF
ON: Shift is D or 3 position
OFF: Shift is except D or 3 position
-