2005-2008 RAV4 · Service Manual ENGINE

P1602 Deterioration of Battery

Diagnostic trouble codes · Vehicles built from Nov 2005

DESCRIPTION

The ECM determines the battery level according to the voltage of the BATT terminal while the engine is running (not cranking).
DTC No.
DTC Detection Condition
Trouble Area
P1602
Battery level is 0%
  1. Battery
  2. ECM back-up power source circuit

INSPECTION PROCEDURE


1. INSPECT BATTERY
  1. Inspect battery voltage.

    1. After the vehicle is driven for 20 minutes, stop the engine.

    2. Turn the ignition switch on (IG) and, turn on the headlight, blower fan, and defogger for 1 minute.

    3. Turn the ignition switch off.

    4. Measure the battery voltage.

      Standard voltage:
      12.5 to 12.9 V at 20°C (68°F)



NG
REPLACE BATTERY
OK

CHECK ECM BACK-UP POWER SOURCE CIRCUIT


← P1601 Injector Correction Circuit Malfunction (EEPROM) (from Jan 2007)P2120 Throttle / Pedal Position Sensor / Switch "D" Circuit (+ 6 more codes) (Nov 2005 – Dec 2006) →