REMOVAL
Removal / installation · Vehicles built Jan 2007 – Jul 2007
Versions by build date: Jan 2007 – Jul 2007 from Aug 2007
| 1.
REMOVE ENGINE ASSEMBLY |
 |
Remove the engine from the vehicle (Click here).
| 2.
REMOVE NO. 1 MANIFOLD CONVERTER INSULATOR |
 |
- Remove the 5 bolts and No. 1 manifold converter insulator.
| 3.
REMOVE NO. 2 MANIFOLD CONVERTER INSULATOR |
 |
- Remove the 3 bolts and No. 2 manifold converter insulator.
| 4.
REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY |
 |
- Disconnect the 2 exhaust gas temperature sensor connectors.
Remove the bolt, nut and No. 1 manifold stay.
- Remove the 3 bolts and No. 2 manifold stay.
- Remove the 2 bolts, nut and No. 2 exhaust manifold stay.
- Remove the 3 nuts, manifold converter and turbine outlet elbow gasket.
| 5.
REMOVE NO. 1 TURBO INSULATOR |
 |
- Remove the 2 bolts and insulator.
| 6.
REMOVE NO. 5 WATER BY-PASS PIPE |
 |
- Using needle-nose pliers, grip the claws of the clip and slide the clip to disconnect the No. 3 water by-pass hose.
- HINT:
- Place a container under the connection before disconnecting the No. 3 water by-pass hose because water in the hose may spill out.
- Using needle-nose pliers, grip the claws of the clip and slide the clip to disconnect the No. 2 water by-pass hose.
- HINT:
- Place a container under the connection before disconnecting the No. 2 water by-pass hose because water in the hose may spill out.
- Remove the 2 bolts and by-pass pipe.
| 7.
REMOVE TURBO OIL OUTLET PIPE |
 |
- Remove the 4 bolts, 2 gaskets and outlet pipe.
- HINT:
- Place a container under the connection before disconnecting the turbo oil outlet pipe because oil in the pipe may spill out.
| 8.
REMOVE NO. 2 TURBO OIL PIPE |
 |
- Disconnect the 2 vacuum hoses.
- Remove the 2 bolts, 2 gaskets and No. 2 turbo oil pipe.
| 9.
REMOVE TURBOCHARGER STAY |
 |
- Remove the 2 nuts, 2 spacers and turbocharger stay.
| 10.
REMOVE TURBOCHARGER SUB-ASSEMBLY |
 |
- Remove the 3 nuts, gasket and turbocharger.