2005-2008 RAV4 · Service Manual ENGINE

DISASSEMBLY

Removal / installation · Vehicles built Nov 2005 – Dec 2006

Versions by build date: Nov 2005 – Dec 2006 Jan 2007 – Jul 2007 Aug 2007 – Jul 2008 from Aug 2008


1. REMOVE FUEL EMISSION HOSE

  1. A124674
    Remove the purge line hose, air inlet line hose and EVAP line tube from the fuel pump.


2. REMOVE FUEL TANK MAIN TUBE SUB-ASSEMBLY

  1. A124669
    Remove the joint clip and fuel tank main tube.

    CAUTION:
    1. Before removing the tube joint clip, check for foreign matter around the clip. Clean if necessary.
    1. Keep the O-ring free of foreign matter, as it becomes contaminated easily.
    1. Do not use any tools in this procedure.
    1. Do not forcefully bend or twist the tube.
    1. Put the tube in a plastic bag to prevent damage and contamination.
    1. If the fuel suction plate and tube are stuck together, pinch the tube and turn it carefully to disconnect it.
    1. Be careful not to damage the clip. If the clip is damaged, replace it.


3. REMOVE FUEL TANK VENT TUBE SET PLATE

  1. A124675
    Remove the 8 bolts and set plate.


4. REMOVE FUEL SUCTION WITH PUMP ASSEMBLY

  1. A124676
    Disconnect the fuel hose and remove the fuel pump from the fuel tank.

    NOTICE:
    Do not damage the fuel pump.

  1. A126699E02
    Remove the gasket from the fuel pump.


5. REMOVE FUEL TANK MAIN TUBE SUB-ASSEMBLY

  1. A124672
    Remove the tube from the fuel tube clamps.


6. REMOVE FUEL EVAPORATION TUBE SUB-ASSEMBLY
  1. Remove the tube from the fuel tube clamps.


7. REMOVE NO.1 FUEL TUBE CLAMP
  1. Remove the 4 tube clamps from the fuel tank.


8. REMOVE NO. 1 FUEL TANK CUSHION

  1. A124667
    Remove the 7 fuel tank cushions from the fuel tank.


9. REMOVE FUEL SENDER GAUGE ASSEMBLY

  1. A124670
    Remove the 5 screws and sender gauge.

← REMOVAL (from Aug 2008)DISASSEMBLY (Jan 2007 – Jul 2007) →