2005-2008 RAV4 · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built Nov 2005 – Dec 2006

Versions by build date: Nov 2005 – Dec 2006 Jan 2007 – Jul 2007 from Aug 2007


1. INSTALL GENERATOR ASSEMBLY

  1. A127719
    Install the generator with the 3 bolts.

    Torque:
    25 N*m{ 255 kgf*cm , 18 ft.*lbf }

    NOTICE:
    Be careful that the wire harness of the crankshaft position sensor does not get caught between the cylinder block and generator when installing the generator.

  1. Connect the generator wire with the nut and bolt.

    Torque:
    9.8 N*m{ 100 kgf*cm , 87 in.*lbf } for nut
    7.7 N*m{ 79 kgf*cm , 68 in.*lbf } for bolt

  1. Install the terminal cap.

  1. Connect the generator connector.


2. INSTALL FRONT DRIVE SHAFT ASSEMBLY RH
  1. Install the front drive shaft (Click here).


3. INSTALL FAN AND GENERATOR V BELT
  1. Install the belt (Click here).


4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
← REASSEMBLY (from Nov 2005)INSTALLATION (Jan 2007 – Jul 2007) →