REMOVAL
Removal / installation · Vehicles built Nov 2005 – Dec 2006
Versions by build date: Nov 2005 – Dec 2006 Jan 2007 – Jul 2007 from Aug 2007
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
| 2. REMOVE FAN AND GENERATOR V BELT |
Remove the belt (Click here).
| 3. REMOVE FRONT DRIVE SHAFT ASSEMBLY RH |
Remove the front drive shaft (Click here).
| 4. REMOVE GENERATOR ASSEMBLY |
Disconnect the generator connector.

Remove the terminal cap.
Remove the nut and bolt, and disconnect the generator wire.
Remove the 3 bolts and generator.
