ON-VEHICLE INSPECTION
Inspection · Vehicles built from Nov 2005
| CHECK BATTERY CURRENT SENSOR ASSEMBLY |
 |
- Measure the resistance of the sensor.
- Standard resistance:
Tester Connection
|
Specified Condition
|
2 (VC5) - 4 (E2)
|
3 to 10 kΩ
|
2 (VC5) - 3 (IB)
|
Below 0.5 kΩ
|
3 (IB) - 4 (E2)
|
3 to 10 kΩ
|
If the result is not as specified, replace the sensor assembly.
- Measure the resistance of the sensor.
- Standard resistance:
Tester Connection
|
Condition
|
Specified Condition
|
1 (THB) - 4 (E2)
|
20 to 30°C (68 to 86°F)
|
1.5 to 2.5 kΩ
|
If the result is not as specified, replace the sensor assembly.