2005-2008 RAV4 · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation · Vehicles built Nov 2005 – Jul 2008

Versions by build date: Nov 2005 – Jul 2008 from Aug 2008


1. INSTALL LOW PITCHED HORN

B129378
  1. Place the stay onto the baffle part of the radiator support upper, and then install the horn with the bolt.

    Torque:
    19.5 N*m{ 199 kgf*cm , 14 ft.*lbf }

  1. Connect the horn connector.


2. INSTALL FRONT BUMPER COVER

  1. B136792
    Put protective tape under the front fender and headlight.

  1. Install the 4 clips.

  1. B136791
    Install the hood cushion center.

  1. w/ Headlight Cleaner:
    Connect the headlight cleaner.

  1. w/ Fog Light:
    Connect the 2 fog light connectors.

  1. B127932
    Attach the 4 claws to install the bumper cover.

  1. B136793
    Install the 8 screws.


3. INSTALL FRONT FENDER LINER RH

HINT:
Use the same procedures described for the LH side.


4. INSTALL FRONT FENDER LINER LH

  1. B133187
    Install the fender liner with the clip and fender liner retainer.

  1. w/ Splash Shield:
    Install the front fender splash shield LH.

  1. Install the screw, nut and bolt.


5. INSTALL RADIATOR SUPPORT OPENING COVER

  1. B130259
    Install the 2 clips.

← INSPECTION (from Nov 2005)INSTALLATION (from Aug 2008) →