B1625/22 Front Passenger Side - Side Airbag Sensor Circuit Malfunction
Diagnostic trouble codes · Vehicles built from Jan 2007
Versions by build date: Nov 2005 – Dec 2006 from Jan 2007
DESCRIPTION
The front passenger side - side airbag sensor consists of parts including the diagnostic circuit and the lateral deceleration sensor.When the center airbag sensor receives signals from the lateral deceleration sensor, it determines whether or not the SRS should be activated.
DTC B1625/22 is set when a malfunction is detected in the front passenger side - side airbag sensor circuit.
| DTC No. |
DTC Detection Condition |
Trouble Area |
| B1625/22 |
When one of following conditions is met:
|
|
WIRING DIAGRAM


INSPECTION PROCEDURE
| 1. CHECK FRONT PASSENGER SIDE - SIDE AIRBAG SENSOR |
![]() ![]() |
Turn the ignition switch off.
Disconnect the cable from the negative (-) battery terminal, and wait for at least 90 seconds.
Interchange the front passenger side - side airbag sensor with the driver side - side airbag sensor and connect the connectors to them.
Connect the cable to the negative (-) battery terminal, and wait for at least 2 seconds.
Turn the ignition switch on (IG), and wait for at least 60 seconds.
Clear the DTCs (Click here).
Turn the ignition switch off.
Turn the ignition switch on (IG), and wait for at least 60 seconds.
Check the DTCs (Click here).
Result Result
Proceed to
DTC B1620/21 and B1625/22 are not output.
A
DTC B1620/21 is output.
B
DTC B1625/22 is output.
C
- HINT:
- DTCs other than DTC B1620/21 and B1625/22 may be output at this time, but they are not related to this check.
|
|
||||
|
|
||||
| A | ||
| ||

