ON-VEHICLE INSPECTION
Inspection · Vehicles built Nov 2005 – Dec 2006
Versions by build date: Nov 2005 – Dec 2006 from Jan 2007
| CHECK GLOW PLUG ASSEMBLY |
Remove the glow plug connector (Click here).
Measure the resistance between the glow plug terminal and ground.

- Standard resistance:
Condition
Specified Condition
-20°C (-4°F)
0.92 Ω
0°C (32°F)
0.94 Ω
20°C (68°F)
0.96 Ω
40°C (104°F)
0.98 Ω
60°C (140°F)
1.00 Ω
- NOTICE:
- Be careful not to damage the glow plugs because it could cause an open circuit or shorten the life of the glow plugs.
- Remove any oil from the glow plug and bakelite washers with a dry cloth.
- Be careful not to damage the glow plugs because it could cause an open circuit or shorten the life of the glow plugs.
Install the glow plug connector (Click here).
