ON-VEHICLE INSPECTION
Inspection · Vehicles built from Nov 2005
| CHECK GLOW PLUG ASSEMBLY |
Remove the glow plug connector (Click here).
Measure the resistance between the glow plug terminal and ground.

- Standard resistance:
Condition
Specified Condition
-20°C (-4°F)
0.84 Ω
0°C (32°F)
0.89 Ω
20°C (68°F)
0.95 Ω
40°C (104°F)
1.01 Ω
60°C (140°F)
1.06 Ω
- NOTICE:
- Be careful not to damage the glow plugs because it could cause an open circuit or shorten the life of the glow plugs.
- Remove any oil from the glow plug and bakelite washers with a dry cloth.
- Be careful not to damage the glow plugs because it could cause an open circuit or shorten the life of the glow plugs.
Install the glow plug connector (Click here).
