INSTALLATION
Removal / installation · Vehicles built from Nov 2005
| 1.
INSTALL CAMSHAFT POSITION SENSOR |
 |
- Apply a light coat of engine oil to the O-ring of the sensor.
- Install the sensor with the bolt.
-
Torque:
- 8.8 N*m{
90 kgf*cm
, 78 in.*lbf
}
Connect the sensor connector.
| 2.
INSTALL RADIATOR RESERVOIR BRACKET |
 |
- Install the bracket with the bolt.
-
Torque:
- 5.0 N*m{
51 kgf*cm
, 44 in.*lbf
}
| 3.
INSTALL RADIATOR RESERVOIR ASSEMBLY |
 |
- Install the reservoir with the 2 bolts.
-
Torque:
- 5.0 N*m{
51 kgf*cm
, 44 in.*lbf
}
| 4.
INSTALL NO. 1 ENGINE COVER
|
 |
- Attach the 4 clips to install the engine cover.
| 5.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
|