REMOVAL
Removal / installation · Vehicles built from Nov 2005
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
| 2. REMOVE NO. 1 ENGINE COVER |
Detach the 4 clips and remove the engine cover.

| 3. REMOVE RADIATOR RESERVOIR ASSEMBLY |
Remove the 2 bolts and reservoir.

| 4. REMOVE RADIATOR RESERVOIR BRACKET |
Remove the bolt and bracket.

| 5. REMOVE CAMSHAFT POSITION SENSOR |
Disconnect the sensor connector.

Remove the bolt and sensor.
