2005-2008 RAV4 · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Nov 2005


INSPECT ENGINE COOLANT TEMPERATURE SENSOR

  1. Partially soak the sensor in water and warm up the water.

    A108624E09

  1. Measure the resistance between the terminals.

    Standard resistance:
    Temperature
    Specified Condition
    Approx. 20°C (68°F)
    2.32 to 2.59 kΩ
    Approx. 80°C (176°F)
    0.310 to 0.326 kΩ

    NOTICE:
    While checking the engine coolant temperature sensor in water, be careful not to allow water to enter the terminals. After checking, wipe off any water on the engine coolant temperature sensor.

    If the result is not as specified, replace the sensor.

← REMOVAL (from Nov 2005)INSTALLATION (Nov 2005 – Dec 2006) →