ON-VEHICLE INSPECTION
Inspection · Vehicles built from Nov 2005
| INSPECT DIESEL THROTTLE BODY ASSEMBLY |
Inspect the throttle position sensor.
Connect the intelligent tester to the DLC3.
Turn the ignition switch on (IG).
Turn the intelligent tester on.
Enter the following menu items: Powertrain / Engine and ECT / Data List / Throttle Position.
When the throttle valve is fully opened, check that the value of "Throttle Position" is within the specification.
- Standard throttle valve opening percentage:
Tester Display
Condition
Specified Condition
Throttle Position
Always
60% or more
- CAUTION:
- When checking the standard throttle valve opening percentage, the shift lever should be in the neutral position.
