2005-2008 RAV4 · Service Manual TRANSMISSION

INSTALLATION

Removal / installation · Vehicles built from Nov 2005


1. INSTALL CLUTCH RELEASE CYLINDER ASSEMBLY

C128484
  1. Install the clutch release cylinder with the 4 bolts.

    Torque:
    12 N*m{ 122 kgf*cm , 9 ft.*lbf }


2. CONNECT CLUTCH RELEASE CYLINDER TO FLEXIBLE HOSE TUBE

C128483E01
  1. Using SST, connect the flexible hose tube.

    SST
    09023-00101  

    Torque:
    15 N*m{ 153 kgf*cm , 11 ft.*lbf } for use without SST
    14 N*m{ 143 kgf*cm , 10 ft.*lbf } for use with SST

    HINT:
    Use a torque wrench with a fulcrum length of 30 cm (11.81 in.).


3. BLEED CLUTCH PIPE LINE
  1. Fill the brake reservoir with brake fluid and bleed the clutch system (Click here).

    Torque:
    8.3 N*m{ 85 kgf*cm , 73 in.*lbf }


4. CHECK FOR BRAKE FLUID LEAKAGE

C126431
  1. Check the fluid level and add fluid if necessary.

    Fluid:
    SAE J1703 or FMVSS No. 116 DOT3

    HINT:
    Add fluid to a level between the reservoir's MIN and MAX lines.

← REASSEMBLY (from Nov 2005)COMPONENTS (from Nov 2005) →