INSTALLATION
Removal / installation · Vehicles built from Nov 2005
| 1. INSTALL CLUTCH RELEASE CYLINDER ASSEMBLY |
![]() ![]() |
Install the clutch release cylinder with the 2 bolts.
- Torque:
- 12 N*m{ 122 kgf*cm , 9 ft.*lbf }
| 2. CONNECT CLUTCH RELEASE CYLINDER TO FLEXIBLE HOSE TUBE |
![]() ![]() |
Using SST, connect the flexible hose tube.
- SST
- 09023-00101
- Torque:
- 15 N*m{ 153 kgf*cm , 11 ft.*lbf } for use without SST
- 14 N*m{ 143 kgf*cm , 10 ft.*lbf } for use with SST
- HINT:
- Use a torque wrench with a fulcrum length of 30 cm (11.81 in.).
| 3. BLEED CLUTCH PIPE LINE |
Fill the brake reservoir with brake fluid and bleed the clutch system (Click here).
- Torque:
- 8.3 N*m{ 85 kgf*cm , 74 in.*lbf }
| 4. CHECK FOR BRAKE FLUID LEAKAGE |
![]() ![]() |
Check the fluid level and add fluid if necessary.
- Fluid:
- SAE J1703 or FMVSS No. 116 DOT3
- HINT:
- Add fluid to a level between the reservoir's MIN and MAX lines.




