INSTALLATION
Removal / installation · Vehicles built from Jan 2007
| 1. INSTALL VACUUM SWITCHING VALVE (for EGR COOLER BY-PASS SWITCHING VALVE) |
Using a 4mm hexagon socket wrench, install the VSV with the 2 bolts.

- Torque:
- 5.0 N*m{ 51 kgf*cm , 44 in.*lbf }
Connect the 2 vacuum hoses.
Connect the VSV connector.
| 2. INSTALL NO. 1 ENGINE COVER |
Detach the 4 clips and remove the engine cover.

| 3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
