REMOVAL
Removal / installation · Vehicles built from Jan 2007
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
| 2. REMOVE NO. 1 ENGINE COVER |
Detach the 4 clips and remove the engine cover.

| 3. REMOVE VACUUM SWITCHING VALVE (for EGR COOLER BY-PASS SWITCHING VALVE) |
Pinch the clip as illustrated, then pull out the VSV connector.

Disconnect the 2 vacuum hoses.
Using a 4mm hexagon socket wrench, remove the 2 bolts and VSV.
