INSTALLATION
Removal / installation · Vehicles built Nov 2005 – Dec 2006
Versions by build date: Nov 2005 – Dec 2006 from Jan 2007
- CAUTION:
- Be sure to read the precautionary notices concerning the SRS airbag system before servicing it (Click here).
| 1. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY |
![]() ![]() |
Connect the connector.
- NOTICE:
- When handling the airbag connector, take care not to damage the airbag wire harness.
Install the driver side knee airbag with the 4 bolts.
- Torque:
- 10 N*m{ 101 kgf*cm , 7 ft.*lbf }
| 2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 3. CHECK SRS WARNING LIGHT |
Check the SRS warning light (Click here).


